Verification: 07aa82ca6ca61b17
April 23, 2024

The D-link DIR-878 Gigabit Router is an Gigabit router that has AC1900 MU-MIMO WiFi capacity. It offers your home high-speed networking options, that are specifically designed for small as as large houses. Login to a Dlink router is able to integrate high-speed 802.11ac Wi-Fi using dual-band technology. It also includes Gigabit Ethernet ports. Furthermore, the DIR-878 gigabit Router offers users and devices with an effortless networking experience that is extremely convenient and the ability to be flexible.

Linking D-link’s DIR-878 Router locally with the Modem

1. For your router to connect to the modem, you must first connect it to the power adapter.
2. Attach the adapter’s power cord to your modem , and turn it on by using the switch for power.
3. Connect your router by using an adapter for power with it. Finally, connect your Dlink DIR-878 Gigabit router wifi router and connect it to the source of power for your home.
4. The power button is turned on in the back of your router, by pushing the button.
5. To confirm the D’link router’s is local login, turn on the modem and verify whether the lights.
6. If the light that is on the Dlink router configuration is on, that indicates that the modem is turned on properly.
7. You should then check the router’s LED. If it’s a pure white or blue, then that the router has been powered on and is now ready for use.
8. It is necessary to connect your device to the router in order to set up an internet connection.
9. Connect your laptop to your Dlink DIR-878 wireless router by connecting an Ethernet cable to the LAN of both the devices.
10. Take a new Ethernet cable, and attach it to one of one of the WAN ports on the router. Lastly, the other end goes to the WAN of the Modem.

On certain Dlink routers On certain models, there are WAN ports that on some models. WAN ports show yellow. While on other models the WAN ports are black.

Wireless connection is made to the D-link DIR-878 router

1. Select the wireless logo of the dlink router from the lower right-hand corner of your desktop and browse an overview of all the available networks.
2. From the list of wireless networks Click on the name of the network. It is likely to be in the box of your router’s configuration card.
3. Set a password, or the security code of the WIFI network. The Dlink router configuration details are printed on the label of the router.
4. You must make connections to your router in order to connect to Dlinkrouter.localpage. Dlinkrouter.localpage network.

Access to local settings of D-link DIR-878 router

  • Browse to an Web directory and enter the IP address of your default into the Addy bar.
  • Your D’link router’s home page can be For certain D-link DIR-878 models the IP address could be
  • Then, in the following step you will need to enter your username and password of the router.
  • Be prepared and write down the specifics on the panel on your router.
  • Inputing the IP address or the default address dlinkap.local will lead you to the Dlink router login window.
  • Enter the user’s name that is admin. Don’t fill in the password section.
  • If it doesn’t work, try using the D’link router local administrator password as the password.

Start the Dlink router configuration Wizard & Select Connection

  • Begin by activating your Smart Setup Wizard to configure your Dlink DIR-878 Gigabit router setup. Select the option to run the Wizard or click on the Next button.
  • Your router will choose the settings based on standard information about the type of wireless connection you have.
  • It will then prompt you to answer to a series of questions to set up your router’s WIFI settings. Click the radial option, that is located near the wireless connection type.
  • The majority of users of cable modems should choose the DHCP connection unless they are aware the requirements of your service provider and an IP address that is static, where you must choose the static IP address.
  • A majority of DSL or ADSL users are required to choose to use the PPPoE network. If you select PPPoE, you will receive prompts to enter your login and password.
  • Input your PPPoE user name and password that was provided from your Internet service provider. Select Next to proceed.

D-link DIR-878 Gigabit Router setup using the Amazon Alexa?

You can download the Alexa app to your smartphone device or tablet computer or iOS device. It is possible to download your Amazon Alexa app from the Google Play store or the Apple app store. Install the app on your mobile device.

After you launch the application, follow the steps below.

Click the menu icon in the upper left corner and then select the”Skills” option. After that, you must look up the local d’link router and look for the appropriate skills for the device that you own from dlinkrouter.local

There are many choices, such as;

  • Links Camera and Controls Camera
  • Dlink router setup using Smart Plug devices
  • The Dlink router logs in using Smart Wi-Fi system, etc.

1. After that, tap then the Enables button to activate the Amazon Alex-related skills that you wish to pair with Amazon Alex. On the next screen make sure you enter the login credentials for your Dlink router to sign in.
2. Check for the skill that you’ve chosen to connect to your D-Link account.
3. When you have reached the confirmation screen for the skill Tap the cross symbol or close the application.
4. Click on the menu [Discover Devices» to find the devices that work with Alexa.

Then, wait some time until Alexa is able to search the devices. The devices that Alexa has found will appear on the screen [Smart Home Screen] and that’s it. You’ve completed the procedure to set up your wireless router for your smart home along with others smart home gadgets that control the Amazon Alexa.